The Quick Pitch System permits easy construction of traditional mortar bed shower floors with the proper minimum water drainage slope of 1/4" per 12" run.
With this time-saving system there is now no chance for an error in measurement, or the need for a level, to achieve a properly sloped shower floor. The Quick Pitch System uses a Center Ring and tapered Float Sticks to assure the correct drainage slope in standard or custom shower areas with walls up to 6' in any direction from the floor drain. This system does not add to the pan liner pre-slope as the Center Ring sits on top of the drain flange bolts.
*Check out our Shower Kits to see what will work best for your shower applications, then choose your liner size.
The Quick Pitch Standard Kit has 6 Tapered Float Sticks (1" to 1 3/4" x 36" long) and 4" Center Ring (3 5/8" inside diameter x 1" high)
If your shower is larger than 30" x 60" you will require additional single sticks. (Perimeter: 1 stick every 30")
These extras are generally needed for use in custom shower areas where either curved, or more than four walls. Sold 4 sticks per package.
**This kit does not come with a center ring.**
Quick-Pitch Extended sticks are designed to easily clip on to the Quick-Pitch Standard sticks for shower areas where the walls are more than 36" (but less than 72") from the floor drain.
**Does not include standard sticks**
Quick-Pitch Extended sticks are designed to easily clip on to the Quick-Pitch Standard sticks for shower areas where the walls are more than 36" (but less than 72") from the floor drain.
**Does not include standard sticks**
Full kit has 6 Pre-Pitch Sticks (1/8" to 7/8" x 36" long) and installation instructions.
**Note: This is for use on the sub floor to slope the liner. use Quick-Pitch sticks for your tile shower floor slope.
For larger than 30" x 60" you may need sing
If you shower area is larger than a 30"x60", you may want to order a couple of extra Pre-Pitch Sticks in addition to the pre-pitch kit to make it easier to float your floor.
Pre-Pitch Extended sticks are designed to easily clip on to the Pre-Pitch Standard sticks for shower areas where the walls are more than 36" (but less than 72") from the floor drain.
**Does not include standard sticks**
Pre-Pitch Extended sticks are designed to easily clip on to the Pre-Pitch Standard sticks for shower areas where the walls are more than 36" (but less than 72") from the floor drain.
**Does not include standard sticks**
Kirb-Perfect is designed to cover a 4 1/2"W x 30"L x 5 1/2"H curb. If your curb is longer than 30 In. you will need to order an additional Kirb-Perfect Kit. Please measure your curb accurately to avoid any shortage for your project.
This Quick Pitch Universal Center Ring is required when using the Quick Pitch System with an ebbe Square Drain in your mortar bed installation, and is as easy as 1-2-3 to install.
This patented ring is designed to sit on top of the bolt flange and under the Quick Pitch Center Ring prior to installing your mortar bed, and is designed to keep the mortar from plugging the weeping holes in the drain.
4" Center Ring is a collar to protect cement from bonding to the drain threads allowing a tile setter the ability to adjust the drain height to the thickness of tile after the mortar bed is hard.
The Handi-Kirbâ„¢ Shower Curb is a stay-in-place plastic form for roll-in, wheelchair accessible shower curb where recessing the compartment floor is not possible or practical.
These clips hold the Quick Pitch Standard and Extended Float sticks in place for the installation on a wood or concrete sub-floor. Package contains 12 clips, 24 screws and 12 double-sided tape pieces.
Crete Sheet can be used to mix your mortar for your tile shower mortar bed - avoid carrying the pails up and down the stairs and from the outside into your house - mix where you are working!
11 Sq/Ft Mortar Reinforcement Kit for use over plywood sub floor to prevent evaporation of mortar into the plywood. Includes Synthetic Lath and Tar Paper
16 Sq/Ft Mortar Reinforcement Kit for use over plywood sub floor to prevent evaporation of mortar into the plywood. Includes Synthetic Lath and Tar Paper